Tortoise Switch Machine
Prototype turnouts don't snap open and closed, they move slowly. This easy-to-mount switch machine features prototypical slow-motion action-three seconds to complete throw.
 
Easy-to-mount slow-motion switch machine features: * Prototypical slow-motion action - three seconds to complete throw * Precision-engineered gear drive mechanism * Simple mounting with linkage included - no additional brackets or linkage necessary * Convenient auxilliary contacts - two sets SPDT provided * Easy wiring - two-wire connection possible
Part # TOR-6000
$15.49 each
Click the photo to order

Tortoise Switch Machine 6-Pack
Prototype turnouts don't snap open and closed, they move slowly. This easy-to-mount switch machine features prototypical slow-motion action-three seconds to complete throw.
 
Easy-to-mount slow-motion switch machine features: * Prototypical slow-motion action - three seconds to complete throw * Precision-engineered gear drive mechanism * Simple mounting with linkage included - no additional brackets or linkage necessary * Convenient auxilliary contacts - two sets SPDT provided * Easy wiring - two-wire connection possible
Part # TOR-6000-6
$87.99
Click the photo to order

Tortoise Switch Machine 12-Pack
Prototype turnouts don't snap open and closed, they move slowly. This easy-to-mount switch machine features prototypical slow-motion action-three seconds to complete throw.
 
Easy-to-mount slow-motion switch machine features: * Prototypical slow-motion action - three seconds to complete throw * Precision-engineered gear drive mechanism * Simple mounting with linkage included - no additional brackets or linkage necessary * Convenient auxilliary contacts - two sets SPDT provided * Easy wiring - two-wire connection possible
Part # TOR-6000-12
$168.99
Click the photo to order

MRC Tortoise Switch Power Supply
Slow motion or latching switch machines add to a layout’s realism, but until now, you needed two DC power supplies for the +12/-12 dual voltage. Now, all you need is one Slow Motion Switch Power Supply and hook-up is quick and simple.
Part # AH-362
$28.99
Click the photo to order

Miniatronics Capacitive Discharge Unit
The Miniatronics Super-Zapper Capacitive Discharge Unit puts electronics to effective use. This fully assembled unit operates one to ten switch machines simultaneously, without the need for heavy transformers (the 16 VAC terminals from any power pack are used.) The safety electronics renders it impossible to burn out switch machine motors. It is ready for re-operation within a fraction of a second after use.
Only heavy duty professional components have been used. This Super-Zapper is easy to connect. Heavy duty screw terminals means only a screwdriver needed to integrate with your old wiring. No soldering! The L.E.D. indicates power ready. Input terminals are marked in red. Unit handles up to10 Switch Machines.
Part # Mini-PDC-1
$28.99
Click the photo to order

Miniatronics Auto Reversing Unit
Wherever there is a need for an automatic reverse system between two points for a display, test track, sidetrack for trolleys or other types of cars. This unit will create added interest for your train layout! Sensing devices included with each unit. Also included are push button switches (S.P.S.T. momentary-normally open #33-025-02) for manual reversing whenever you wish to reverse the direction of the train manually. Also included are mounting feet, heat shrink tubing and a FREE transformer to operate the unit (WT412). If that is not enough, a screwdriver is included because there are special screws on the PC board. This is truly what is meant by a value added package. The unit is good for all scales including trolleys. The unit is rated at 3 Amps. Note: OPERATES ONLY ON 12 VOLT DC POWER.
Part # Mini-RU11
$36.99
Click the photo to order

Peco PL-10E Switch Machine
Switch Machine w/extended pin .
This machine can be used under table or on the turnout directly by cutting the pin down.
Part # PL-10E
$9.59
Click the photo to order

Peco PL-12 Switch Machine adapter plate w/spring and connecting rod for above table mounting.
Part # PL-12
$2.39
Click the photo to order

Peco PL-9 Switch Machine adapter plate for under table mount.
(5 per package)
Part # PL-9
$4.39
Click the photo to order

Caboose Industries N Scale Ground throw (Rigid)
Strong, self-lubricating black Delrin ground throws with external cam for strength and maximum throw. Molded on pin for direct mounting. All 100 series (Rigid) stands require modelers to fabricate a spring connecting link between the stand and the turnout. All 200 series units (Sprung) have internal springs so they can be connected directly to the turnout throwbar.
Part # CAB-105R
$2.49
Click the photo to order

Caboose Industries N Scale Ground throw (Spung)
Strong, self-lubricating black Delrin ground throws with external cam for strength and maximum throw. Molded on pin for direct mounting. All 100 series (Rigid) stands require modelers to fabricate a spring connecting link between the stand and the turnout. All 200 series units (Sprung) have internal springs so they can be connected directly to the turnout throwbar.
Part # CAB-206S
$2.69
Click the photo to order

Caboose Industries N Scale Ground throw (Spung) For Atlas Code 55
Strong, self-lubricating black Delrin ground throws with external cam for strength and maximum throw. Molded on pin for direct mounting. All 100 series (Rigid) stands require modelers to fabricate a spring connecting link between the stand and the turnout. All 200 series units (Sprung) have internal springs so they can be connected directly to the turnout throwbar.
Part # CAB-222S
$2.99
Click the photo to order

Kato Re-railer and Unitrack connector
This is a GREAT re-railing tool
Part # KAT-24-000
$1.09
Click the photo to order

Peco Re-railer
This is a GREAT re-railing tool
Part # SL-337
$3.19
Click the photo to order

Rix Re-railer
This is a GREAT re-railing tool
Part # RIX-0003
$2.29
Click the photo to order

Back to Track

Back to Top