|
|
|
 |
|
|
|
|
LENZ Set-90
Set-90 includes an LH90 Engineer's throttle, an LZV100 Command/Power Station, easy to read manuals and a coupon for a super discount on two decoders.
Part # SET-90
$248.99
Click the photo to order
|
|
|
|
|
|
|
LENZ Set-100
Set-100 includes an LH100 dispatchers throttle, an LZV100 Command/Power Station, easy to read manuals and a coupon for a super discount on two decoders.
Part # SET-100
$328.99
Click the photo to order
|
|
|
|
|
|
|
Lenz LH90 Knob Throttle
Please welcome our newest addition to DIGITAL plus, the LH90. The LH90 incorporates the latest technology, while providing an operator interface that is designed for model railroaders and very intuitive to use.
Part # LH90
$78.99
Click the photo to order
|
|
|
|
|
|
|
Lenz LH100 Keypad Throttle
The LH100 V3 keypad based dispatchers throttle is a universal input device for all DIGITAL plus system and is compatible with all XpressNET based systems.
Part # LH100
$177.99
Click the photo to order
|
|
|
|
|
|
|
Lenz LV102 5 Amp Power Station
Ultra clean DCC Track Power · Adjustable DCC Track Voltage· Opto-isolation and thermal protection for Safety· Short and overload protection· Designed to meet NMRA RP-9.1.2 Power Station Interface requirements Includes RP-9.3.1 cutout device The LV102 includes an powerful internal 5 amp power station. that provides clean and safe DCC power to the track. New circuitry has been developed to reduce noise, which provides exceptionally clean power to operate your DCC equipped trains.
Part # LV102
$123.99
Click the photo to order
|
|
|
|
|
|
|
Lenz LI101F Computer Interface
High speed connection of your Digital plus system to a computer. All functions of the system are available to computer programs through an RS232 interface to your computer and a 4 wire connection to XpressNet. Data transfer rate can be set from 19.2 K Bits/second to 115.2 K bits/second, 9 pin SUB D jack, connecting cable included. Enclosed CD includes configuration software and several demo programs. For use on all XpressNet systems.
Part # LI101F
$76.99
Click the photo to order
|
|
|
|
|
|
|
Lenz LIUSBV10 USB Computer Interface
Allows all Digital plus by Lenz features to be controlled from a PC,USB - interface to the computer, plug and play installation suitable for Windows 2000 and Windows XP. RJ45 socket for connection to XpressNetThree LEDs display status for XpressNet and USB connection as well as communication, software update directly of the PC!USB and RJ45 connection cables included. Also included is a CD that contains tools that allows you to easily configure locomotive decoder CVs on the programming track, allows you to operate locomotives on the layout, and a configuration program for adjusting the XpressNet address.
Part # LIUSBV10
$148.99
Click the photo to order
|
|
|
|
|
|
|
LENZ LA152 Panel Connector
The LA152 provides an easy method to install XpressNET ports in convenient locations anywhere on your model railroad. The LA152 uses the same wiring and thus is also compatible with NCE and Wangrow Cab Busses.
Part # LA152
$19.49
Click the photo to order
|
|
|
|
|
|
|
LENZ LT100 Analog Protection Module
The LT100 serves to electrically isolate a DCC operated layout area from a conventional DC operated one. The LT100 momentarily breaks the power supply to the conventional side of the layout when the isolation gap is crossed. This protects both the DC power supply and the decoders when the locomotive bridges both sides of the gaps between these two sections. One LT100 is needed for each conventional DC power supply.
Part # LT100
$36.99
Click the photo to order
|
|
|
|
|
|
|
LENZ LK100 Reverse Loop Module
Developed to simplify the wiring of reversing loops on two-rail DC layouts using NMRA Digital Command Control by allowing you to operate your trains through a reversing section/loop without manually changing locomotive direction or track polarity.
Part # LK100
$58.99
Click the photo to order
|
|
|
