SALE 40% off

Ngineering 9 Volt Battery Clip
These handy snap-on battery clips will connect to any PP3 type 9-volt battery (alkaline, NiCad, or Lithium). The snap connectors are nickel-plated steel for long life and the posts are tin-plated brass for easy soldering. The posts can be easily cut shorter for circuit board mounting applications.
Can be used on N8102 above.
(pack of 4)
Part # N-N3301-4
$4.49
Click to order

Ngineering Ultra-Miniature SPDT Switch
If you need an incredibly small SPDT switch to turn something on and off, or switch between two devices, we’ve got just the one for you. Made by ITTCannon, this little slide switch features silver contacts and will carry 150ma at 12 volts! To see just how small this little fellow is, click on this Compare size link . Incredible! Mechanically rated at 10,000 cycles, it will certainly last. The sliding action has a positive “click”.
(pack of 2)
Part # N-N3200-2
$2.28
Click to order

N Scale Ngineering Cast-iron Railings
This fret is arranged in four duplicate sections, each containing four styles of cast-iron railings and two types of ornate cast grillwork. Each section contains a continuous length of 23 N-scale feet of each railing style, and each grillwork. Click on the Detail button above for a close-up view of each item. This style railing is seen in curved sections around trees, sidewalk railings in front of basement windows (circa 1920s city buildings), decorative railing around public kiosks, park areas, balcony railings on older structures, and numerous other town and city locations.
Part # N-NM007
$11.29
Click to order

Ngineering Oak Leaves and Branches
This large fret contains 16 sections of delicate meandering branches densely clustered with leaves. Not only do the leaves have the distinctive Oak shape, the leaf texture is apparent. Due to their minute size and delicate nature, many other types of foliage can be modeled using these leaves and branches. Save any extra little “clippings” for yard debris, pickup truck loads, trash barrels, dumpsters, or other areas that need “enhancing”. Use segments as climbing plants on buildings and trellises. There are literally hundreds of places that can be improved with a little touch of imagination
Click on image to go to cart for larger view.
Part # N-NS033
$15.79
Click to order

Ngineering Oak Sycamore and Maple
Unbelievable is the only way to describe this large, 8″ x 2-3/4″ fret containing 16 sections of tree branches with correctly shaped leaves (lots of leaves) that are to scale in N-scale and accurately represent the foliage found on Sycamore or Maple trees. Until now, ground foam was the only way to describe foliage in N-scale. Not any more…
Learn how to give these branches and leaves a realistic appearance. Carefully cut them out of the fret, randomly mount them on one of our Bare Tree Frames, a plastic tree armature or an Azalea branch clipping, gently twist and shape them into a realistic appearance, do a little minor paint touch-up, and…viola! You have a tree that really LOOKS like a tree!
Also, for more realism, you can add a little dab of Elmer’s (white) glue to the joint where you attach the branch and let it dry before you do the paint touch-up. This will make it look more like it has “grown” from where you attached it.
Click on image to go to cart for larger view.
Part # N-NS035
$15.79
Click to order

Ngineering Weeping Willow
Here’s a way to turn a rather mundane plastic tree armature or wooden branch clipping into a thing of beauty. Just add our Weeping Willow Branches with Leaves. Spray the entire fret (face and edges) a light willow green. After it has dried thoroughly, carefully cut out and mount the branches as described above, shaping them so they hang (droop) down like the real thing. Start from the lower branches and work to the top. Pause periodically to do a light touch-up on any paint nicks or scrapes. Before you know it, the mundane has been transformed into the magnificent. These leaves and branches can also be used to model Eucalyptus trees, common throughout the world in many varieties, as well as various other vines and plants with long slender leaves.
Click on image to go to cart for larger view.
Part # N-NS037
$15.79
Click to order

Ngineering Tree Frames Set A
This heavy gauge (0.010″ thick) fret contains an assortment of highly detailed bare tree armatures that can easily be formed into 3-dimensional trees. Using 5 simple steps, in about 15 minutes time, a tree can be produced to such a level of realism that it will look spectacular in any detailed setting even without foliage! Finally, you can have bare trees in winter scenes , or add some dead or dying trees for variety. With the addition of foliage, these trees become absolutely dazzling in their detailed likeness to the real thing. Please check out our other Examples below. This fret contains the following: 4 trees, 22 N-scale feet tall, 5 trees, 20 feet tall, and 8 trees, 14 feet tall. The slightly higher cost of these frets is due to the thicker high-purity brass stock that is used to produce them.
Click on image to go to cart for larger view.
Part # N-NS038
$16.99
Click to order

Ngineering Tree Frames Set B
This fret is a variation on set ‘A’ above with different tree shapes in different quantities. It contains 12 trees, 14 scale feet tall, and 7 trees, 20 feet tall. Each of the frets have several tree frames that are identical on that fret. It’s worth noting that even with two identical tree frames, it would be very difficult to produce two identical trees. The slight variations in the bending processes from tree to tree produce sufficient differences to give each a unique appearance. Add to this, the fact that each can be positioned so it is viewed from a slightly different side or angle, and each will be totally distinctive.
Click on image to go to cart for larger view.
Part # N-NS039
$16.99
Click to order

Ngineering Tree Frames Set C
In this fret we have slightly different height trees. There are 13 trees, 16 scale-feet tall, and 12 trees, 18 feet tall. With a total of 25 trees, this fret would be great to make a small orchard next to a farmhouse. How about placing them every 50 scale feet along a town street. Ideal for smaller deciduous trees like Aspen, Alder or Birch for intermixing with pine or fir trees.
Click on image to go to cart for larger view.
Part # N-NS040
$16.99
Click to order

Ngineering Tree Frames Set D
This fret contains our largest tree frames. There are 5 trees, 35 scale-feet tall. These majestic beauties can be formed into many different varieties such as hardwoods like Oak or Walnut, or used as a foundation for a Willow, Maple, Sycamore or Cottonwood. Use one as a focal point in a town square. How about next to a farmhouse with a tire swing hanging from one of the
branches? Lots of possibilities.
Click on image to go to cart for larger view.
Part # N-NS041
$16.99
Click to order